Dust Suppression Systems




Sprinkler System for Haul Roads


Typical system for roadway or site entrance

This system is designed to run from a tank. Pumps can also be fitted with foot valves and strainers to allow pumps to operate from a pond or lagoon. Different seals can be fitted to the pump to allow the pump to handle dirtier water.

The system provides good coverage of a road 10 meters wide by 90 meters long. Wider coverage is possible by fitting larger sprinklers with larger throws. Optimum coverage can be determined by fitting different sized sprinklers in yards of irregular sizes.

Large capacity rain guns are also available to cover larger areas and variable angle of high trajectory rain guns to cover stockpiles.

Larger capacity sprinklers will require larger volumes of water to achieve greater throws and will also require larger pumps and pipe work to operate.

Wind direction and speed will affect coverage of sprinklers and must be taken into account when positioning sprinklers.

All systems are tailor-made to suit the customer's application and only basic site layout information is required for this.

Below are some sample pictures of a larger Haul Road Sprinkler System:



A typical pump setup of a larger Haul Road Sprinkler System



Part of a 1.2 km Haul Road Sprinkler System



Haul Road Sprinkler System in operation





Supply System Comprising

3 phase end suction pump

Steel suction pipe fittings to connect to customer's tank

In-line strainer for pump

5 off sprinklers with 12 metre maximum throw

5 off sprinkler tees at 18 metre centres to fit sprinklers into line

5 off valves to control and regulate each individual sprinkler

Support Stakes, U bolts and brackets for each sprinkler

Black MDPE pipe and fittings to connect sprinklers and pump
   
  Price: POA

 

 
www.andersondesign.co.uk